|
SUPPORT UNITS |
|
|
Support units are built by using circular standard air pads, whose performances are described on sheet S02.
These are completed with a steel frame and include their support at rest and a throttle valve.
Support units are for use with solid loads having flat support faces underneath. A minimum of 3 units is used per load.
Bearing surface should be at least half of support area.
|
SUPPORT CHARACTERISTICS |
|
Air flow(Nl/sec) on:
| Dimensions (mm):
| Weight(kg):
|
Type |
Capaci ty kg |
me tal |
epo xy |
conc rete |
A |
B |
C |
D |
E |
Raise |
Steel |
Alu |
Series 300
| 300-1 300-2 300-3
| 300 500 700
| 2.5 3 5
| 4 5 7
| 6 8 12
| 60
| 350
| 350
| 250
| 330
| 15±5
| 13.5
| 8 8 9
|
Series 450
| 450-1 450-2 450-3
| 750 1,250 1,700
| 5 5 7
| 8 8 9
| 12 12 17
| 60
| 520
| 520
| 420
| 500
| 25±5
| 25
| 13 13 15
|
Series 600
| 600 600-R 600-RS 6 600-RS 10 600-RS 20 600-RS 30 600-RS 40
| 2,500 4,000 6,000 10,000 20,000 30,000 40,000
| 4 6 9 15 30 45 60
| 7 10 15 25 50 75 100
| 8 12 18 30 60 90 120
| 80
| 660 660 660 660 660 660 1340
| 660 660 660 660 1340 2000 1340
| 560 560 560 560 465 - -
| 640 640 640 640 1110 - -
| 30±5
| 35 35 35 35 65 100 130
| 21 21 21 21 44 66 88
|
|
AIR SUPPLY |
· The independent supply, with flow adjustment individually for each support, allows the handling of excentric loads (with each support always within its capacity range).
· Every support is connected to air by means of flexible pipes, with 16 or 19 mm ID.
· The manifold is connected to the air supply system with a flexible pipe, whose section is calculated as a function of the number of support elements, of the required air flow (depending on floor quality) and of tube length. A pressure regulator is not necessarily required.
Example: Tube ID = 19 mm for 4 units Ø 600 on smoothed concrete without joints.
|
|
A product: |
|
VOTRE SOLUTION TECHNOLOGIQUE |
|
|
|